A multihole nozzle controls recrystallization of high-moisture extruded maize starches: Effect of cooling die temperature.

Hot extrusion is utilized for starch modification due to its high mechanical input and product output. Amylose recrystallization commences and primarily depends on intermolecular interactions after conventional extrusion. Hence, the design of a new component based on the existed extrusion system was aimed at facilitating molecular aggregation, potentially accelerating starch recrystallization. In this study, a nozzle sheet comprising 89 holes was integrated into the cooling die. The impact of the multihole nozzle on the structure and in vitro digestibility of extruded maize starches after retrogradation was examined at varying cooling die temperatures. The results showed that the nozzle-assembled extrusion system operated effectively without additional mechanical or yield losses. At 50 °C, the crystallinity of nozzle-produced starch was approximately 70 % higher than that of conventionally extruded starch, predominantly owing to the B-type allomorph of the amylose double helix. Recrystallized amylopectin was also found in these nozzle-produced starches, indicating that multihole nozzle-induced uniaxial elongational flow resulted in the rapid starch crystallization. The increased formation of recrystallized amylose led to improved molecular order in starch structures while reducing their digestibility. These findings revealed a new approach to improve starch crystallinity by incorporating a nozzle sheet in the extrusion process.

Advances in the Interaction between Food-Derived Nanoparticles and the Intestinal Barrier.

The maintenance of the intestinal barrier is crucial for the overall balance of the gut and the organism. Dysfunction of the intestinal barrier is closely associated with intestinal diseases. In recent years, due to the increased presence of nanoparticles (NPs) in the human diet, there has been a growing concern regarding the safety and potential impact of these NPs on gastrointestinal health. The interactions between food-derived NPs and the intestinal barrier are numerous. This review provides an introduction to the structure and function of the intestinal barrier along with a comprehensive summary of the interactions between food NPs and the intestinal barrier. Additionally, we highlight the potential connection between the food NPs-induced dysfunction of the intestinal barrier and inflammatory bowel disease. Finally, we discuss the enhancement of food NPs on the repair of the intestinal barrier damage and the nutrients absorption. This review holds significant importance in furthering our understanding of the regulatory mechanisms of food-derived NPs on the intestinal barrier.

Formation, influencing factors, and applications of internal channels in starch: A review.

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

High-moisture extrusion of curdlan: Texture and structure.

High-moisture extrusion is a promising thermomechanical technology extensively employed in manufacturing fibrous meat analogues from plant-based proteins, garnering considerable research attention. However, polysaccharide-based extrusion has been rarely explored. The present study investigates the effects of varying extruder barrel temperatures (130 °C-200 °C) on the texture and structure of curdlan extrudates, and highlights the formation mechanism. Results showed that the single chain of curdlan aggregates to form triple-helix chains upon extrusion, consequently enhancing the crystallinity, particularly at 170 °C. The hardness, chewiness, and mechanical properties improved with increasing barrel temperature. Moreover, barrel temperatures affected the macrostructure, the extrudates maintained intact morphologies except at 160 °C due to the melting of curdlan gel as confirmed by the differential scanning calorimetry thermogram. Microstructural analysis revealed that curdlan extrudates transited through three phases: original gel (130 °C, 140 °C, and 150 °C), transition state (160 °C), and regenerated gel (170 °C, 180 °C, 190 °C, and 200 °C). The steady state of regenerated gel (170 °C) exhibited higher crystallinity and smaller fractal dimension, resulting in a more compact and crosslinked gel network. This study elucidates the structure transition of curdlan gel at extremely high temperatures, offering valuable technical insights for developing theories and methods with respect to polysaccharide-based extrusion that may find applications in food-related fields.

High Viscosity Slows the Utilization of Rapidly Fermentable Dietary Fiber by Human Gut Microbiota.

In the present study, the influence of viscosity on the fermentation characteristics of fructooligosaccharides (FOS) by gut microbiota was examined. Different concentrations of methylcellulose (MC) were added to create varying viscosities and the mixture was fermented with FOS by gut microbiota. The results demonstrated that higher viscosity had a significant impact on slowing down the fermentation rate of FOS. Specifically, the addition of 2.5 wt% MC, which had the highest viscosity, resulted in the lowest and slowest production of gas and short-chain fatty acids (SCFAs), indicating that increased viscosity could hinder the breakdown of FOS by gut microbiota. Additionally, the slower fermentation of FOS did not significantly alter the structure of the gut microbiota community compared to that of FOS alone, suggesting that MC could be used in combination with FOS to achieve similar prebiotic effects and promote gut health while exhibiting a slower fermentation rate.

Improving the quality and processing efficiency of beef jerky via drying in confined conditions of pre-stretching.

Inspired by the mechanical enhancement of hydrogel via drying in confined conditions, we applied this strategy to beef jerky manufacture for improving the quality and processing efficiency. In our study, beef strips were pre-stretched and then dried in a tensile state, and the confined conditions were achieved by controlling the stretched strains from 20% to 120%. Compared with the sample dried freely, beef jerky dried in confined conditions of different pre-stretching strains exhibited improved quality based on texture and sensory analysis. Additionally, this method also enhanced processing efficiency by reducing approximately 50% drying time. The excellent sensory quality and good texture of beef jerky were obtained as the pre-stretching strain was 80%. Drying beef strips in confined conditions made muscle fibers tense and enhanced hydrophobicity of myofibrillar proteins, leading to a compact structure with high shear force and anisotropy, and rapid water loss in beef jerky. This facile and green method provides a promising route to enrich the existing technologies of jerky processing.

Concentration-Regulated Fibrillation of Soy Protein: Structure and In Vitro Digestion.

The impact of protein types, heating temperatures, and times on protein fibrillation has been widely studied. However, there is little understanding of the influence of protein concentration (PC) on the protein fibril assembly. In this work, the structure and in vitro digestibility of soy protein amyloid fibrils (SAFs) were investigated at pH 2.0 and different PCs. Significant increases in fibril conversion rate and parallel ß-sheets proportion were observed in SAFs upon increasing the PC from 2 to 8% (w/v). The AFM images showed that curly fibrils were prone to form at 2-6% PCs, while rigid, straight fibrils developed at higher PCs (≥8%). As evidenced in XRD results, increasing PC led to a more stable structure of SAFs with enhanced thermal stability and lower digestibility. Moreover, positive correlations among PC, ß-sheet content, persistence length, enthalpy, and total hydrolysis were established. These findings would provide valuable insights into concentration-regulated protein fibrillation.

Influence of interfacial properties/structure on oxygen diffusion in oil-in-water emulsions.

Oxygen diffusion played an important role in the lipid oxidation of food emulsions. In this study, a simple method was developed to quantitatively observe the oxygen diffusion in the oil-water biphasic system, and it was further applied to investigate the relationship between the oxygen diffusion and lipid oxidation in O/W emulsions. Various factors that related to the emulsion oxidation were considered, from their influence on the oxygen diffusion and lipid oxidation in the emulsions. Results showed that there was obvious correlation between the oxygen diffusion and lipid oxidation in O/W emulsions, which reveals the inhibition of oxygen diffusion could apparently slow down the lipid oxidation. Moreover, the changes of oil phase, water phase and interfacial layer of the emulsions, which were related to the oxygen diffusion, could improve the oxidative stability of the emulsions effectively. Our findings are helpful for deep understanding the mechanisms of the lipid oxidation in food emulsions.

Core-shell starch as a platform for reducing starch digestion and saturated fat intake.

Ill-balanced diets, especially high-carbohydrate and high-fat diets, have led to an explosion of diabetes and cardiovascular diseases worldwide, posing great threats to human health. The structural design of functional foods can offer promising solutions to these afflictions. Here, we introduce a versatile core-shell starch made from food-grade starch and alcohol-soluble protein to reduce starch digestion and saturated fat intake. The fabrication of core-shell structure is realized through an anti-solvent method, assisted by electrostatic interaction, which is generalizable to starches and proteins from different sources and feasible for scale-up production. The protein shell imparts a higher gelatinization temperature and a lower pasting viscosity to the starch, suggesting restricted granule swelling, which leads to a reduced starch digestibility as proved by in vitro digestion studies. The hypoglycemic effect of core-shell starch is demonstrated in vivo. We also show that the application of core-shell starch can be extended to oil encapsulants and saturated fat replacers due to the impact of protein shell on the surface hydrophobicity of the starch. These results may advance the establishment of healthy diets and the tackling of diet-related diseases.

Formation and application of edible oleogels prepared by dispersing soy fiber particles in oil phase.

Oleogels containing less saturated and trans-fats were considered as an ideal option to replace the solid fats in foods. In this research, oleogel was fabricated by dispersing soy fiber particles (SFP) in soy oil, and further it was used in bread preparation. Effect of the particle size, particle content and the second fluid content on the formation of oleogels were evaluated, based on the appearance and rheological properties. Results showed that the suspension of SFP in soy oil (24%, w/w) could be transformed into gel-like state, upon the addition of the second fluid. The SFP based networks were dominated by the capillary force which was originated from the second fluid. The rheological properties and yield stress of the oleogels could be modulated by particle size and particle content of SFP in oil phase, as well as the second fluid content in the system. When the oleogels were applicated in bread preparation, a layered structure could be formed in the bread, indicating the possibility of replacing the solid fats in bakery products by our oleogels. Our results offered a feasibility approach for oil structuring with natural raw materials, and developed a new approach to replace the solid fats in foods.

Role of conformation transition of high acyl gellan in the design of double network hydrogels.

Double network hydrogels (DNs) with excellent strength and toughness have been preliminarily applied in the preparation of artificial foods. To evaluate the effect of conformation transition of ductile polymers on the physicochemical properties of DNs, we firstly prepared agarose (AR)/high acyl gellan (HAG) DNs and investigated their mechanical properties, and then calcium ion (Ca2+) was introduced into optimized AR/HAG DNs to regulate the conformation of ductile chains (HAG) for further increasing their mechanical properties. The mechanical strength of the optimized AR/HAG gel is 5 times and 2 times that of AR and HAG gel, respectively. Compared with adding Ca2+ method, immersing Ca2+ solution endowed optimized DNs with 5-fold increase in mechanical strength, outstanding textural properties and lower swelling ratio, which was attributed to the extended conformation of ductile chains. Furthermore, the obtained DNs were reminiscent of beef omasum based on their physicochemical properties. Optimized AR/HAG DNs after immersing in 2 wt% CaCl2 solution exhibited comparable texture properties with beef omasum by three correlation analysis methods and sensory evaluation, providing a new strategy to fabricate biomimetic food with high chewiness by regulating the conformation of ductile polymers in DNs.

Understanding the differences in heat-induced gel properties of twelve legume proteins: A comparative study.

This study aimed to investigate the rheological and textural properties of heat-induced gels from twelve legume protein isolates at pH 3.0 and 7.0, including black kidney bean (BKPI), speckled kidney bean (SKPI), panda bean (PDPI), cowpea (CPPI), mung bean (MPI), adzuki bean (API), rice bean (RPI), black soybean (BPI), soybean (SPI), chickpea (CPI), broad bean (BRPI) and pea (PPI). SDS-PAGE revealed that 7S globulin was prominent protein in BKPI, SKPI, PDPI, CPPI, MPI, API and RPI, the main protein fraction of CPI was 11S globulin, and BPI, SPI, BRPI and PPI contained both 7S and 11S globulins as major components. Based on the gel's Power Law constant (K') and hardness, twelve legume proteins were divided into three categories with high, medium and low gel strength. BKPI, SKPI and PDPI with Phaseolin being the major protein fraction showed high gel strength regardless of pH. Electrostatic interactions, hydrophobic interactions and hydrogen bonds were the most important intermolecular forces in the formation of legume protein gel networks, of which gel strength at pH 3.0 and pH 7.0 was significantly affected by electrostatic interactions and hydrogen bonds, respectively. Moreover, gel strength was also remarkably negatively influenced by the non-network proteins. SEM observation indicated that the microstructure of gels at pH 7.0 was denser and more homogeneous than that at pH 3.0, leading to better water holding capacity. These findings would be of great importance for understanding the differences in legume protein gels, and also laid the scientific support for expanding applications of legume proteins in gel-based foods.

Recent advancements in encapsulation of chitosan-based enzymes and their applications in food industry.

Enzymes are readily inactivated in harsh micro-environment due to changes in pH, temperature, and ionic strength. Developing suitable and feasible techniques for stabilizing enzymes in food sector is critical for preventing them from degradation. This review provides an overview on chitosan (CS)-based enzymes encapsulation techniques, enzyme release mechanisms, and their applications in food industry. The challenges and future prospects of CS-based enzymes encapsulation were also discussed. CS-based encapsulation techniques including ionotropic gelation, emulsification, spray drying, layer-by-layer self-assembly, hydrogels, and films have been studied to improve the encapsulation efficacy (EE), heat, acid and base stability of enzymes for their applications in food, agricultural, and medical industries. The smart delivery design, new delivery system development, and in vivo releasing mechanisms of enzymes using CS-based encapsulation techniques have also been evaluated in laboratory level studies. The CS-based encapsulation techniques in commercial products should be further improved for broadening their application fields. In conclusion, CS-based encapsulation techniques may provide a promising approach to improve EE and bioavailability of enzymes applied in food industry.HighlightsEnzymes play a critical role in food industries but susceptible to inactivation.Chitosan-based materials could be used to maintain the enzyme activity.Releasing mechanisms of enzymes from encapsulators were outlined.Applications of encapsulated enzymes in food fields was discussed.

Structure analysis and quality evaluation of plant-based meat analogs.

The growing world's population increases the demand of proteins. Meat products as the major source of high protein food are facing environmental impacts and animal welfare issues. Therefore, plant-based meat analogs are developed and gain a foothold in global markets. The structure design, sensory attributes and nutrient characteristics of meat analogs are crucial points to match the real meat. This review aimed to systematically introduce the structural analysis methods and evaluate meat analog products from quality-related attributes. First, various strategies of analyzing the fibrous structure of meat analogs were illustrated, including microscopic imaging and several optical techniques. Then, representative techniques such as NMR and AFM-IR for analyzing the distribution of moisture and lipid in meat analogs are introduced. In terms of quality, we elaborated on the texture and sensory evaluation methods and dialectically analyzed meat analogs' nutrition, which can provide a guidance for the advanced development of meat analogs.

Recent advances in bioactive nanocrystal-stabilized Pickering emulsions: Fabrication, characterization, and biological assessment.

Numerous literatures have shown the advantages of Pickering emulsion (PE) for the delivery of bioactive ingredients in the fields of food, medicine, and cosmetics, among others. On this basis, the multi-loading mode of bioactives (internal phase encapsulation and/or loading at the interface) in small molecular bioactives nanocrystal-stabilized PE (BNC-PE) enables them higher loading efficiencies, controlled release, and synergistic or superimposed effects. Therefore, BNC-PE offers an efficacious delivery system. In this review, we briefly summarize BNC-PE fabrication and characterization, with a focus on the processes of possible evolution and absorption of differentially applied BNC-PE when interacting with the body. In addition, methods of monitoring changes and absorption of BNC-PE in vivo, from the nanomaterial perspective, are also introduced. The purpose of this review is to provide an accessible and comprehensive methodology for the characterization and evaluation of BNC-PE after formulation and preparation, especially in relation to biological assessment and detailed mechanisms throughout the absorption process of BNC-PE in vivo.

Fibrillization kinetics and rheological properties of panda bean (Vigna umbellata (Thunb.) Ohwi et Ohashi) protein isolate at pH 2.0.

Recently, research interests are growing regarding the formation and mechanisms of amyloid fibrils from plant proteins. This study investigated the fibrillization kinetics and rheological behaviors of panda bean protein isolate (PBPI) at pH 2.0 and 90 °C for various heating times (0-24 h). Results showed that PBPI formed two distinct classes of fibrils after heating for 10 h, including flexible fibril with a contour length of ∼751 nm, and rigid fibril with periodicity of ∼40 nm. The secondary structural changes during fibril formation were monitored by circular dichroism spectroscopy and indicated that ß-sheet content increased first (0-12 h) and then decreased (>12 h), which coincided with similar changes in thioflavin T fluorescence. The gel electrophoresis revealed that the polypeptides of PBPI were progressively hydrolyzed upon heating, and the resulting short fragments were involved in fibril formation rather than PBPI monomer. PBPI-derived fibrils showed extremely high viscosity and storage modulus. A plausible molecular mechanism for PBPI fibrillation process was hypothesized, including protein unfolding, hydrolysis, assembly into matured fibrils, and dissociation of the fibrils. The findings provide useful information to manipulate the formation of legume proteins-based fibrils and will benefit future research to explore their potential applications.

Doubling growth of egg-box structure during Calcium-mediated molecular assembly of alginate.

Ca2+-mediated molecular assembly of alginate underpins its wide range of applications in foods, pharmaceutics, biomedicines, tissue engineering and environmental treatments. The mode of growth of egg-box structure of alginate in the presence of Ca2+ is a long-standing fundamental problem to be concluded. In this work, we investigate the Ca-induced structural evolution of alginate in dilute solution using atomic force microscopy and dilute solution viscometry. It is demonstrated that the structural evolution follows the three critical steps of monocomplexation, dimerization and multimerization, upon binding with Ca2+. Interestingly, the alginate single chains grow into dimers and multimers via a doubling mode, i.e., successive emerging of dimer, tetramer, octamer, and hexadecamer. Compared with lower guluronate (G) alginate, higher G alginate exhibits a more pronounced multimerization process occurring at a lower ratio of Ca/G. A mechanistic model depicting the evolution of egg-box structure is proposed. The results would add new knowledge to the current egg-box model regarding the molecular assembly and gelation of an important biopolymer alginate, and provide fundamental basis for molecular engineering of alginate for more advanced applications.

Heat-induced pea protein isolate gels reinforced by panda bean protein amyloid fibrils: Gelling properties and formation mechanism.

The roles of panda bean protein amyloid fibrils (PDPF) in modifying the textural and rheological properties of heat-induced pea protein isolate (PPI) gels were investigated. It was found that the incorporation of PDPF significantly enhanced (p < 0.05) the strength of PPI gel. This effect was PDPF concentration-dependent and was predominantly attributable to the enhanced intermolecular interactions between PDPF and PPI through hydrogen bonds and hydrophobic interactions. Synchronously, the non-network proteins content in PPI-PDPF gels decreased from 23.6 % to 6.6 % when PDPF concentration increased from 0 to 1.50 % (w/w). Cryo-scanning electron microscopy proved that PDPF was filled in the PPI gel network leading to more compact and interconnected gel structure. However, the water holding capacity and secondary structures of PPI gel were not significantly affected. The findings of this study showed that PDPF was effective in improving the PPI gel functional quality, which provided scientific support for PDPF as a promising gel ingredient in food industrial applications.

Jerky-Inspired Fabrication of Anisotropic Hydrogels with Widely Tunable Mechanical Properties.

Jerky is a type of meat product traditionally produced using a hang-drying process to achieve desirable textural properties. Inspired by the jerky processing, we present a strategy for fabricating strong alginate hydrogels with highly anisotropic structures via stretching and drying under constant stress. The tunable stretching process endowed the alginate hydrogels with adjustable mechanical properties and structural features by promoting the orientation and aggregation of the constituent polymers. At a high water content of about 80%, the tensile strength of the obtained hydrogel was increased to 20 MPa, which was 10 times higher than that of the hydrogel without the stretching process. Moreover, these hydrogels can be favorably compared with other common structural materials. This paper introduces a facile strategy to tune the structural alignment and mechanical properties of hydrogels, which will expand the applicability of the natural hydrogels formed by non-covalent interactions.

Gelation behavior and mechanism of alginate with calcium: Dependence on monovalent counterions.

The present work investigates the calcium-induced gelation behavior and gel properties of alginate samples of lithium-, sodium-, and potassium-forms. It was found that the effect of the alkali metal counterions varied greatly with the calcium concentration regime, namely, the molar ratio of calcium to guluronate (R = Ca/G). Four different regions were identified, including R < 0.25, 0.25 < R < 0.55, 0.55 < R < 1.0, and R > 1.0. The counterion dependence was interpreted by the relative interaction strength of the monovalent cations with COO- groups and their exchange reaction with Ca2+ ions. A mechanistic model depicting the role of counterions was proposed in relation to different steps of the binding and gelation of alginate with calcium. The knowledge gained in the study would further advance the understanding of the gelation mechanism of the industrially important alginate and guide its specific utilizations.